Configuring Rmon Events - Cisco Nexus 5000 Series Configuration Manual

Configuring RMON Events

Configuring RMON Events
You can configure RMON events to associate with RMON alarms. You can reuse the same event with multiple
RMON alarms.
Ensure you have configured an SNMP user and enabled SNMP notifications.
Procedure
Step 1
Step 2
Step 3
Step 4
Verifying RMON Configuration
To display RMON configuration information, perform one of the following tasks:
Command
switch# show rmon alarms
switch# show rmon events
switch# show rmon hcalarms
switch# show rmon logs
Default RMON Settings
The following table lists the default settings for RMON parameters.
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
166
Command or Action
switch# configure terminal
switch(config)# rmon event index
[description string] [log] [trap] [owner
name]
switch(config)# show rmon {alarms |
hcalarms}
switch# copy running-config
startup-config
Purpose
Enters configuration mode.
Configures an RMON event. The description
string and owner name can be any alphanumeric
string.
(Optional)
Displays information about RMON alarms or
high-capacity alarms.
(Optional)
Saves this configuration change.
Purpose
Displays information about RMON alarms.
Displays information about RMON events.
Displays information about RMON hcalarms.
Displays information about RMON logs.
Configuring RMON