Purging A Barrel - Cornelius VIPER Service Manual

Purging a Barrel

Step
1
2
3
4
5
NOTE: When the PURGE button is pressed, it changes to a STOP button.
Filling a Barrel
Step
1
2
3
4
5
NOTE: When FILL button is pressed, it changes to a STOP button.
© 2016, Cornelius Inc
BARREL #1 PURGE
#2 OFF
MAINT
12:51P
MAR 04
BACK PURGE FILL
Figure 21. Barrel Maintenance Screen
Action
From the Select menu (Figure 20), open the Barrel
Purge a barrel
Maintenance menu, shown in Figure 21.
Use the Up and Down arrows to highlight the desired
Select the barrel
barrel
Press the PURGE button at the bottom of the display
Select Purge function
to select purge for the highlighted barrel
Place a container under the barrel dispensing valve,
open the dispensing valve and dispense all the prod-
Empty the barrel
uct from the barrel. As the product level lowers in the
barrel, partially close the valve to avoid spurting.
When the barrel is completely empty, close the dis-
pensing valve and press the STOP button at the bot-
Complete the procedure
tom of the display to turn off the purge. Press the
BACK button to return to the Select menu.
Action
From the Select menu (Figure 20), open the Barrel
Fill a barrel
Maintenance menu, shown in Figure 21.
Use the Up and Down arrows to highlight the desired
Select the barrel
barrel
Press the FILL button at the bottom of the display to fill
Select Fill function
the highlighted barrel
When the fill completes, intermittently open and close
Finish filling the barrel
the relief valve to bleed CO
Press the STOP button at the bottom of the display to
Complete the procedure stop the fill. Press the BACK button to return to the
Select menu.
SPIN
Table 21.
Procedure
Table 22.
Procedure
from the barrel.
2
- 25 -
Viper Low overrun Service Manual
Publication Number: 621360241LOEWSE