Table of Contents
Advertisement
TRENDnet User's Guide
Video Recording
Video Recording
Pre-record:
Recording time before trigger event.
Post-record:
Recording time after trigger event.
Overwrite:
Select Yes to allow older recordings to be
overwritten.
Enable Record Schedule:
Check this box and then click Save to enable video
recording.
Edit:
Click Edit to edit the recording schedule.
© Copyright 2015 TRENDnet. All Rights Reserved.
1. Select day of the week you want to edit the
schedule.
2. Select All Day or Customized schedule of the day.
3. Set the time period and the event you want to
trigger the video recording continuous (always
recording) or motion detection.
4. Click Copy to Week if you want the same daily
schedule every day. Or, you can select other day
of the week and click Copy to copy the schedule
of the day to other days.
5. Click another day of the week by clicking on its tab
to set the next schedule. Click OK when you have
finished your settings.
Click Save to save the changes
TV-IP312PI
31
Advertisement
Table of Contents
