Table of Contents
Advertisement
TRENDnet User's Guide
Domain:
Enter your registered domain name on selected
DDNS service.
User Name:
Enter the account name.
Password:
Enter the password.
Click Save to save the changes
PPPoE (ADSL)
Setup PPPoE (ADSL) connection to connect your camera with your ISP, Internet Service
Provider.
PPPoE (ADSL)
Enable PPPoE:
Check this box to enable PPPoE connection.
© Copyright 2015 TRENDnet. All Rights Reserved.
Dynamic IP:
The IP address provided by ISP
User Name:
Enter the account name.
Password:
Enter the password.
Confirm:
Enter the password again.
Click Save to save the changes
SNMP
SNMP Settings allows you to assign the contact details, location, community name and
trap settings for SNMP. This is a networking management protocol used to monitor
network-attached devices. SNMP allows messages (called protocol data units) to be sent
to various parts of a network. Upon receiving these messages, SNMP compatible devices
(called agents) return data stored in their Management Information Bases.
TV-IP322WI
34
Hide quick links:
Advertisement
Table of Contents
