Table of Contents
Advertisement
ELITE 790 Terminal
2-
The Terminal
The terminal case contains the following elements:
• The portable terminal and base.
• A cable that connects the terminal to a telephone line.
• A power pack that connects the terminal to a 115 or 230 volt supply (depending on
the country)
3- The Terminal Connections
There are two connectors on the back of the terminal. See section 7 for a picture.
The blue jack is for a portable hands free kit. The black connector is suitable for a peripheral
device like a barcode scanner, for which a specific software application is required.
4- The Base Connections
Telephone Connection
The telephone cable supplied with the Elite
terminal must be connected to the port
marked with the symbol
end of the cable (RJ11) must be connected
to the telephone jack.
Electrical Connection
The jack from the power supply is plugged
into the port marked with the symbol
. The electrical plug is connected to
a wall socket (115 or 220 volts, depending
on the country).
Only use the power pack provided with
the terminal.
Connection to an external peripheral device
The serial port can be used to connect to
devices such as cheque readers or PC's.
The ELITE 790 terminal must be powered
off before connecting the cable to the serial
port.
4
. The other
Telephone line
Power Supply
Serial port
Advertisement
Table of Contents
