Table of Contents
Advertisement
ELITE 790 Terminal
2- Cleaning Procedures
The plastic used in the construction of this terminal may be damaged if cleaned with strong
solvents.
The following is a list of recommendations for cleaning the terminal and its base.
• Clean the outside of the terminal with a soft cloth moistened with a mild
detergent solution.
• Never spray cleaning solution directly onto the terminal as liquid may enter the
unit.
• Do not use Isopropyl Alcohol based cleaning products, use water-based.
• If in doubt about a cleaning product, contact your terminal supplier.
3- Changing the paper roll
Do not pull the paper, press the key
.
a paper feed
Only use paper provided by your distributor.
Using other types of paper could damage the
printer.
Do not wait until the paper roll is completely
finished before changing it.
stripe on the paper appears, remove the
paper roll and replace it. You can use the
paper feed key
key is only active when the machine is in an
idle state.
To loading of a new paper roll, open the cover, lift the lever to the right of the printer,
Slide paper through the printer until it comes out the other side. Lower the lever. Press
the paper feed key
18
When the red
to move the paper. This
to check the paper has fed through properly.
for
Lever
Advertisement
Table of Contents
