Install the decorating logs.
Fasten decorating logs 1 ¡¢
Figure 3
Insert the pinhole on the upper part of log 4 into the pin on the left side of log 1. Place the lower part on
the flat roof at the left side of log 3 (Figure 5).
Insert the pinhole on the upper side of log 5 into the pin on the right side of log 1. Place the lower part on
the flat roof at the right side of log 3 (Figure 6).
Figure 5
¡¢3 onto the correspondent angle iron (Figure 4).
¡¢2 ¡¢
¡¢
¡¢
¡¢
¡¢
¡¢
¡¢
2 1
Figure 4
Figure 6
Need help?
Do you have a question about the EL250RYLB-O and is the answer not in the manual?
Questions and answers