Change Security Code - NTT docomo FOMA P906i Instruction Manual

Information
pAt shooting, the Call/Charging indicator flickers in red and the shutter tone sounds
regardless of the Manner Mode setting. The sound volume for shutter tone cannot be
changed. Furthermore, the shutter tone does not sound during playback of a music
file by MUSIC Player, or playback of a program by Music&Video Channel, or in pause
state.
Function Menu of the Face Data Reading Display
Function menu
Brightness You can adjust to -3 (dark) through +3 (bright).
Select a brightness level.
At Face reader
pYou can adjust brightness also by pressing 3 from the Face
start-up
Data Reading display.
±0
Help You can check the cautions for shooting.
pYou can bring up Help also by pressing 0 from the Face
Data Reading display.
Delete Stored Images
You can reset all the face data files stored in Face Reader.
1
mSettingsLock/SecurityLock setting
Face reader setting
Enter your Terminal Security Code
Delete stored imagesYES
Information
pYou cannot reset the face data files during Personal Data Lock or IC Card Lock.
pWhen you reset the face data files, "PIM/IC security mode" is set to "Security code".
Operation/Explanation
Recognition-failed Image
The images not judged as yourself by Face Reader recognition operation
are saved. You can use these images to specify who tried to illegally
access your data.
The image is overwritten every time recognition-failed image is made.
1
mSettingsLock/SecurityLock setting
Face reader setting
Enter your Terminal Security Code
Recog. failed imageSelect an image.
pTo delete the recognition-failed images, press i(
and then select "YES".
Face Reader Security
You can set Face Reader to additionally recognize blinking of the eyes.
1
mSettingsLock/SecurityLock setting
Face reader setting
Enter your Terminal Security Code
Face reader securityNormal or High
Normal. . . Does not recognize blinking of the eyes.
High . . . . . Recognizes blinking of the eyes.

Change Security Code

You can set a password to be entered instead of the Face Reader
authentication for when "PIM/IC security mode" is set to "Face reader" or
"Double security".
1
mSettingsLock/SecurityLock setting
Face reader setting
Enter your Terminal Security Code
Change security code
Enter the current Face Reader Security Code.
pIf you enter the code for the first time, enter "0000".
), select "Delete this",
139