Store Messages - NTT docomo FOMA P906i Instruction Manual

<Chaku-moji>
Using Chaku-moji
When making a voice call or videophone call, you can send your text
message to tell the subject during calling.
pFor details on Chaku-moji or compatible models, refer to DoCoMo web page or "Mobile
Phone User's Guide [Network Services]".
pThe sending end is charged, but the receiving end is not charged.
When a Chaku-moji message is received
A Chaku-moji message is displayed below a caller. The
Chaku-moji message is stored in Received Calls as well.
pThe Chaku-moji message is displayed only during ringing. It
is not displayed during a call.
pEven when a Chaku-moji message comes in within the ring
start time set by "Ring time", it is received and recorded in
Received Calls.
pThe Chaku-moji message is displayed on the Private window when "Chaku-moji" of
"Called" on page 117 is set to "ON".
pThe Chaku-moji message is not displayed during Lock All, Omakase Lock, or Personal
Data Lock. However, you can check the Chaku-moji message from Received Calls
after the lock is released.

Store Messages

You can store up to 10 Chaku-moji messages in the Message list.
1
mServiceChaku-mojiCreate message
Highlight <Not stored> and press l(
Enter a message.
pTo edit a stored message, highlight it and press l(
pYou can enter up to 10 characters regardless of whether they are pictographs,
symbols, or full-pitch/half-pitch characters.
Make a Call with a Message
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
2
i(
Function menu
Create message
Select message
Sent messages
3
Press d or
pPress l(
pThe Chaku-moji message being sent is displayed during dialing.
Information
pWhen a Chaku-moji message has arrived at the other party's phone, "Transmission
completed" is displayed, and you are charged a transmission fee.
)
pWhen a Chaku-moji message does not arrive at the other party's phone such as when
the other party's phone is not a Chaku-moji compatible mobile phone or the call is not
allowed by "Message disp. settings" at the receiving end, "Transmission failed" is
).
displayed. In this case, you are not charged a transmission fee.
pDepending on the radio wave conditions, the transmission result may not be
displayed at the sending end even if a Chaku-moji message has arrived at the other
party's phone. In this case, you are charged a transmission fee.
pEven if you make a call sending a Chaku-moji message, the Chaku-moji message is
not displayed and you are not charged a transmission fee (the call is not recorded in
Received Calls at the receiving end) when the other party's phone is out of the service
area, turned off, during Public Mode (Drive Mode), or the ring time for Record
Message Setting is set to zero seconds. Also, the transmission result is not displayed
at the sending end.
)Chaku-mojiDo the following operations.
Operation/Explanation
You can create a Chaku-moji message just before dialing.
Enter a message.
pYou can enter up to 10 characters regardless of whether they
are pictographs, symbols, or full-pitch/half-pitch characters.
pThe Chaku-moji message created using this function is not
stored in the Message list.
From the Message list, you can select a stored message.
Select a message.
From the Sent Message list, you can select a Chaku-moji
message to be sent. Up to 10 sent Chaku-moji messages only
are stored in the Sent Message list. If you send the same Chaku-
moji message, the older one is deleted. When the number of sent
Chaku-moji messages exceeds 10, the messages are deleted
from the oldest one.
Select a sent message.
o ( O
).
) to make a videophone call.
57