Table of Contents
Advertisement
Function menu
Delete allEnter your Terminal Security CodeYES
Delete
(Delete all)
<Text Reader>
Using Text Reader
You can scan printed phone numbers, mail addresses or alphanumeric
characters such as URLs using the outside camera, and store them as
text information. Use the text information to make calls, compose i-mode
mail, connect to the Internet, and so on.
■When scanning with Text Reader
pTake the character strings as large as possible
within the guide frame.
pAutofocus works when you scan characters
about 10 cm or more away from them. When
you scan characters in the out-of-focus state,
the recognition rate lowers.
pScan the character string with the camera set in
parallel.
Scan Text
At Text Reader
Zoom: Magnified view
start-up
You can store eight scanned data files of up to 256 half-pitch characters
per item.
The number of characters you can scan at a time is up to 50 half-pitch
characters, and you can scan the increased characters in parts.
1
mLifeKitText readerScan text
The Text Reader menu is displayed.
pYou can paste the Text Reader menu to the desktop. (See page 127)
168
Operation/Explanation
Guide frame
2
Fit the characters to be scanned to the
guide frame and press
When the focus is locked, a confirmation tone sounds
and the guide frame becomes green.
pPress
C
o to show the reduced display, and press
to return to the former display.
3
O
o (
Press
).
The characters are scanned. (The shutter tone does not sound.)
pTo cancel scanning, press r.
pWhen scanning is completed, the scanning completion tone sounds and the Call/
Charging indicator lights. The sound level is fixed and cannot be changed.
However, the tone does not sound in Manner Mode or while "Phone" of "Ring
volume" is set to "Silent".
4
Confirm the scanned result.
The scanned characters are underlined.
Confirm the scanned characters for
mistakes.
pPress r to restart scanning.
pTo store the characters without correcting,
go to step 7.
5
o to highlight a character to be corrected
M
Press
Press the number of the conversion candidate.
pConversion candidates are displayed up to four kinds for each character.
pWhen you want to correct a character to other than the conversion candidate,
highlight the character to be corrected and press l(
character after switching to "Alphabet entry mode" or "Numeric entry mode".
However you cannot enter characters such as ".ne.jp" or ".co.jp" by pressing
a.
o .
X
o
V
Scanning Text display
Conversion
candidate
Scanned
result
Scanned Text
Confirmation display
), then enter a
Advertisement
Table of Contents
