Table of Contents
Advertisement
Function name
You can find this in
Index.
<Alarm>
Using Alarm
You can set Alarm to alert you at the specified time with an alarm tone,
animation and illumination. You can store up to twelve alarms.
Operating
1
m Stationery Alarm
procedure
Highlight an alarm and press
(See page 33)
l(
)
Do the following operations.
Reference display
(Characters and settings
are for reference.)
Item
Alarm
You can set whether to validate or invalidate the alarm.
Time
You cannot set the same time as the time set for the stored
alarm.
Tone
Chapter title
Volume
If you set "Step", the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
You can
Prefer manner
You can set the alarm tone which sounds at the specified time
search by
mode
during Manner Mode.
chapter.
ON. . . . . Sounds at the same volume as set for "Alarm volume".
OFF. . . . Sounds at the volume set for this function.
2
Press l(
Options and their
explanations
408
Menu number
(See page 35)
+
m
-
4
Operation/Explanation
ON or OFF
Enter the time for sounding the alarm.
Select a type of alarm tone Select a folder
Select an alarm tone.
B
o to adjust the volume.
Use
ON or OFF
).
Note: The page above is a sample.
4
-
Function Menu while Alarm is Displayed
Function menu
Edit
Go to step 1 of "Using Alarm" on page 408.
Detail
You can display the stored alarm contents.
Set this
You can validate the stored alarm.
YES
You can validate also by pressing
Set all
You can validate all the stored alarm.
YES
Delete
Delete this YES
(Delete this)
Delete
Enter you Terminal Security Code YES
(Delete all)
Information
During a call, the alarm tone sounds at the level set for "Volume" (earpiece volume).
When you set the power to automatically turn on and an alarm to sound, the default
alarm tone sounds if the alarm which is set with the UIM restrictions has been
selected.
Turn off the FOMA phone after setting "Auto power ON" to "OFF" when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for "Alarm", "Schedule", and "ToDo"
The icon appears on the desktop.
"
" . . . Displayed when an alarm is set for today (except the setting for past time).
"
" . . . Displayed when an alarm is set for tomorrow or onward only.
If you set "Alarm" of the stored schedule event/ToDo item to "OFF", the icons are not
displayed.
Items shown on the
display
(Some items cannot
be executed.)
Operation/Explanation
Operation and
supplementary
O
o (
).
explanation for each
item
Lower sub-menu item
of the Function menu
Cautions or
references for using
each function
Operations related to
the function and
explanations for
supplementary
operations
3
Advertisement
Table of Contents
