Table of Contents
Advertisement
direction of PTZ camera lens.
6.
Auto pan. After you setup Preset position numbers and the auto pan path
group, click
7.
Auto pan path group. After setting up Preset position numbers from the
server, you can enable the auto pan path group function according to your
demands from the client. Click
cycles to the desired positions and stays for the appointed time that you
setup from the server. Users can click the 4 auto pan path group buttons at
the same time to monitor the 16 Preset positions cyclically.
8.
Preset position numbers. Users can appoint Preset positions of the PTZ
camera lens from the server. Follow the steps to set Preset position numbers.
A. Select a desired preset number.
B. Click direction buttons to adjust the PTZ camera lens to a proper position
C. Click
Repeat the same steps to set all preset position numbers.16 Preset position
numbers are the maximum for a PTZ camera. Click the Preset position
numbers to make the lens move to the desired positions.
9.
Moving speed of camera lens. After you setup the preset position numbers,
you can adjust the moving speed of camera lens by clicking the direction
buttons to speed up/down the movement of lens.
10. Save. After you determine the preset position, please click
setting.
11. Exit. Click this icon to close PTZ camera controller.
4.7 Using Event Log Viewer
Click
to check the Event Log Viewer dialog. The Event Log Viewer shows
event logs, operation logs, POS logs, system logs and network logs.
AVerMedia NV1000/3000/5000/7000 User's Manual
to monitor positions in sequence.
to keep the assigned preset position number setting.
, and you will find the PTZ camera lens
.
to keep the
Advertisement
Table of Contents
