Rfid Control Submenus; Rfid Reader; Error Handling - Printronix T5000e Series Quick Setup Manual

Printronix, inc. owner manual pilot printer t5000e tm series
Hide thumbs Also See for T5000e Series:
Table of Contents

Advertisement

RFID CONTROL
(cont. from previous page)
Custom Tag Len
Custom Tag Class

RFID CONTROL Submenus

RFID Reader

This menu item enables or disables the RFID encoder. The default
is Enable.

Error Handling

This menu item selects the error handling mode for RFID failures.
The default is Overstrike.
In Overstrike mode, each failed label prints with the Overstrike
pattern and the form retries on a new label until the Label Retry
count is exhausted. At this time, the error message "RFID Error:
Check Media" displays. The failed label will not reprint.
In None mode, no specific action is taken when a tag fails to be
programmed.
In Stop mode, when a tag fails to be programmed, the printer will
halt and display the error message "RFID Error: Check Media." The
label is discarded and reprinting of the label (if desired) must be
initiated from the host. When the error is cleared, the label with the
failed tag moves forward until the next label is in position to be
printed.
8 *
8 to 32
Class 1 *
Class 0
Notes:
* = Default.
Italicized items are available only when you enable
Admin User in the PRINTER CONTROL menu.
RFID CONTROL Submenus
Class 0+
51

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T5000e Series and is the answer not in the manual?

Table of Contents