Quick Setup Submenus; Print Intensity - Printronix T5000e Series Quick Setup Manual

QUICK SETUP
(cont. from previous page)
SMT: Status
Disabled*
SMT: Sel Toolset
Toolset [1]*
EPC
SMT: Select Tool
zEPC

QUICK SETUP Submenus

Print Intensity

Specifies the level of thermal energy from the printhead to be used
for the type of media and ribbon installed.
Large numbers imply more heat (thermal energy) to be applied for
each dot. This has a significant effect on print quality. The print
intensity and speed must match the media and ribbon type to obtain
the best possible print quality and barcode grades.
The range is -15 through +15:
•
In Transfer mode, the default is -3.
•
In Direct Thermal mode, the default is 0.
Enabled
Toolset [1] to Toolset [4]
1 1 1
GTIN UPCA
2, 3 2, 3 2, 3
zGTIN zUPCA
Notes:
* = Default.
1
Appears only if Toolset [1] is selected under
SMT: Sel Toolset.
2
Appears only if Toolset [2] is selected under
SMT: Sel Toolset.
3
Undocumented options are reserved for internal
use and future design.
QUICK SETUP Submenus
1 1
EAN8 EAN13 UCC128
2, 3 2, 3
zEAN8 zEAN13 zUCC128
1
2, 3
39