Read Tag - Printronix T5000e Series Quick Setup Manual

LOCK;
AT p ;
(D)
datafield
NOTE: RFWRITE fields are not expandable in VDUP and/or
HDUP sections.

Read Tag

Read Tag is not a command, but an element of the ALPHA and
BARCODE commands. See "Alphanumerics" and "Bar Codes" in
the IGP/PGL Programmer's Reference Manual for more
information.
Purpose Embed RFID data into an ALPHA or BARCODE data
field.
<RDI> position,length[,format];
Format
<RDI>
position
datafield is ignored, and dynamic data
must be entered via the RF command in
the EXECUTE mode. The length of the
dynamic data must be equal to L .
Optional parameter to write-protect the
data. Currently not supported.
p specifies the decimal start position
where data will be written to the tag.
Subsequent bits will be shifted and
previous bits are nulled.
Delimiter designating the start and end of
static data for the RFWRITE field.
Replace (D) with any printable character,
except the SFCC and "/" (the slash
character).
The static data of the RFWRITE field.
The RFID Data Indicator character, as
defined by the RFREAD parameter in the
ALPHA or BARCODE commands. See
the ALPHA and/or BARCODE command
description for details.
The decimal number that specifies the
starting position of the data inside the
transponder.
Read Tag
57