Lower
Media Sensor
Media
Guard
8. Lower the media damper.
9. Verify that the left edge of the media is against the fixed guide
on the bottom of the media damper.
10. Push the media width guide in until it is flush with the outer
edge of the media.
11. Check the horizontal position of the lower media sensor (shown
above) and the upper media sensor (shown on page 34).
(See "Positioning The Media Sensors" on page 35.)
Loading Roll Media
Media Width
Guide
Media
Damper
Fixed
Guide
29
Need help?
Do you have a question about the T5000e Series and is the answer not in the manual?