Printronix T5000e Series Quick Setup Manual page 55

Printronix, inc. owner manual pilot printer t5000e tm series

Hide thumbs Also See for T5000e Series:

Table of Contents

Admin User Menu Items

When Custom Tag is set to Disable, the settings in the custom tag

menus are ignored by the RFID encoder.

When it is set to Enable, the RFID encoder uses the settings in the

custom tag menus, which must be set to match the characteristics

of the custom tag.

When it is set to Duplicate, the settings of the selected Tag Type

menu item are copied into the custom tag menus.

Custom Pwr Set

NOTE: To enable this menu item, set Custom Tag to Enable.

This menu item selects the power level to be used in the RFID

encoder. 1 is the lowest power level setting, and 20 is the highest.

The default is 5.

Custom Tag Len

NOTE: To enable this menu item, set Custom Tag to Enable.

This menu item selects the number of bytes in the tag.

The default is 8.

Custom Tag Class

NOTE: To enable this menu item, set Custom Tag to Enable.

This menu item selects the class of the custom tag. Class 1 and

Class 0+ tags are read/write. Class 0 tags are read only.

The default is Class 1.

Table of Contents