Sound Problems - Getac B300 User Manual

If you are sure the operation has stop, reset the computer. (See "Resetting

the Computer" later in this chapter.)

Sound Problems

No sound is produced.
Make sure that the volume control is not set too low.

Make sure that the computer is not in Sleep mode.

If using an external speaker, make sure that the speaker is properly connected.

Distorted sound is produced.
Make sure that the volume control is not set too high or too low. In most cases,

a high setting can cause the audio electronics to distort the sound.
The sound system does not record.
Adjust the playback or recording sound levels.

The external microphone or audio device does not work.
Make sure that the microphone is connected to the proper connector on the

computer.
Click the speaker symbol on the taskbar and check the Windows volume control.

Check the volume control of your computer.

Startup Problems
When you turn on the computer, it does not seem to respond.
Make sure that either the AC adapter is connected or the battery has power.

For models with the "HDD preheat" feature: When turning on the computer in an

extremely low temperature environment, the computer will heat up the hard disk
before starting up. The Num Lock indicator glows amber to indicate the heater
8-10
Troubleshooting