Replacing The Battery Pack - Getac B300 User Manual

Replacing the Battery Pack

CAUTION:

There is danger of explosion if the battery is incorrectly replaced. Replace the
battery only with the computer manufacturer's optional battery packs. Discard
used batteries according to the dealer's instructions.

Do not attempt to disassemble the battery pack.
If you often rely on battery power for a long period of time while traveling, you
may consider the purchase of an additional battery pack from your dealer and keep
it with you in a fully charged state as a backup.
To replace the battery pack, follow these steps:
1. Turn off the computer and disconnect the AC adapter.
2. Locate the battery compartment on the left side of the computer.
3. Slide the cover lock to the left () and then lift the release latch () to
open the compartment cover.
4. Pull the ribbon strip and slide the battery pack out of the compartment.
5. With the ribbon strip facing outward, insert the new battery pack all the way
into the compartment.
3-6
Managing Power