Getac B300 User Manual page 17

2. Press the power button (
3. Each time the computer is turned on, it performs a Power-On Self Test (POST),
and the operating system such as Windows should start.
Turning Off
When you finish a working session, you can stop the system by turning off the power
or leaving it in Sleep or Hibernation mode:
To...
Power off
(Shutdown)
Sleep
Hibernate
* "Sleep" is the default setting of the power button. You may change what the
power button does in Windows Control Panel.
).
Use the Windows Start menu in the lower left and follow the
shutdown procedure.
Press the power button* or use the Windows Start menu to put
the computer in Sleep mode.
Use the Windows Start menu to put the computer in Hibernation
mode. (See "Hibernation" in Chapter 3 for more information.)
Do this...
1-7
Getting Started