Getac B300 User Manual page 134

Make sure that the SSID setting is the same for every WLAN device in the

network.
Your computer is not recognizing changes. Restart the computer.

Make sure that the IP address or subnet mask setting is correct.

I cannot communicate with the computer in the network when Infrastructure
mode is configured.
Make sure that the Access Point your computer is associated with is powered

on and all the LEDs are working properly.
If the operating radio channel is in poor quality, change the Access Point and

all the wireless station(s) within the BSSID to another radio channel.
Your computer may be in an out-of-range situation. Move your computer closer

to the Access Point it is associated with.
Make sure that your computer is configured with the same security option

(encryption) to the Access Point.
Use the Web Manager/Telnet of the Access Point to check whether it is connected

to the network.
Reconfigure and reset the Access Point.

I cannot access the network.
Make sure that the network configuration is appropriate.

Make sure that the user name or password is correct.

You have moved out of range of the network.

Turn off power management.

8-12
Troubleshooting