Table of Contents
Advertisement
Chapter 4
Consumable Replacement
10. Vacuum the toner from the toner spray-guard brush on the
developing unit.
11. Shake the new developer bottle several times, remove the
bottle cap, and screw the nozzle tightly onto the bottle.
12. While rotating the developing roller knob counterclockwise,
evenly pour the entire bottle of developer powder into the
developing unit.
13. Replace the cover and tighten the screws.
IMPORTANT
If toner or developer spills on clothing, use cold water to
remove it.
14. Install the developing unit into the printer (see step 1 through
step 8, starting on page 140).
146
1
Legend:
1)
Developer Bottle
2)
Developing Roller Knob
2
Advertisement
Table of Contents
