Table of Contents
Advertisement
Chapter 6
System Status And Error Messages
TABLE NOTES:
1. For any error with Reprint on Fault enabled: If the printer stops
while in the middle of printing a page, reloading the paper and
reprinting are required. There may be other cases requiring
reloading and reprinting; if so, a message will appear.
2. For any error with Reprint on Fault disabled: If the printer stops
while in the middle of printing a page, reloading the paper is
required and pages are lost.
3. For error numbers 01, 14, and 15: If the error occurs while
paper is not moving, it is not necessary to reload or reprint.
4. For error number 02: If the error is caused by a paper-empty at
the lower sensor (Paper Near End Sensor), it is not necessary
to reprint.
5. Status message only. No operator action required to clear
message
224
Advertisement
Table of Contents
