Printronix L5035 User Manual page 179

CAUTION
The transfer charger must be in the down position to avoid
scratching the drum. Failure to perform steps 3 and 4 will
damage the drum.
3. Rotate the transfer elevator drive shaft counterclockwise.
Watch the charger movement:
a. If the charger starts to move up, it is already in the down
position.
b. If the charger starts to move down, continue to rotate the
drive shaft until the charger reaches the complete down
position.
Legend:
1)
2)
Cleaning The Fuser Unit Cover Glass
2
Transfer Charger
Transfer Elevator Drive Shaft
1
179