Table of Contents
Advertisement
Chapter 2
Using The Control Panel
PAGE EJECT Key
The PAGE EJECT key has the following functions when the printer
is online:
When the JOB IN PROCESS status indicator lights steadily,
pressing PAGE EJECT causes the printer to print all data in the
printer. If continuous form paper is used, the page then will be cut
at the perforation (unless the Burst On Eject option is disabled).
When the JOB IN PROCESS status indicator flashes, pressing
PAGE EJECT causes the printer to attempt to print any data in the
buffer. The paper motion caused by the page eject operation may
interrupt the printing of data that is not currently in the buffer. Once
the paper motion has occurred, the data that was not yet in the
buffer should print. If continuous form paper is used, the page then
will be cut at the perforation (unless the Burst On Eject option is
disabled).
To start downloading files to the printer, press the PAGE EJECT +
ONLINE key. See Chapter 3 for more information.
IMPORTANT
Do not press PAGE EJECT while JOB IN PROCESS is flashing,
or your print job might become misaligned.
When the JOB IN PROCESS status indicator is not lit or flashing,
PAGE EJECT has no effect.
Pressing the SHIFT + PAGE EJECT keys together at the same
time moves the paper one page length without printing or cutting
the paper. This function is intended to be used with fanfold paper
only. It can be used to feed the paper into (customer-supplied)
postprocessing equipment.
ENTER Key
When you are entering parameters in the configuration menu,
press ENTER to select the value shown in the LCD. The printer will
confirm your selection by placing an asterisk (*) next to the value in
the display. However, if the ENTER key is locked, "ENTER KEY
LOCKED" appears and the value is not accepted.
50
Advertisement
Table of Contents
