Table of Contents
Advertisement
• Utilization -- Estimates the main physical layer network usage on an interface during the session sampling. The
value is reflected in hundredths of a percent.
RMON Events Control
The RMON Events Control page contains fields for defining RMON events.
To open RMON History Control screen perform the folling:
1.
Click Statics/RMON -> RMON -> Events Control
2.
The RMON Events Control screen is displayed as in Figure 3-82
The page includes the following fields:
• Event Entry -- The event.
• Community -- Community to which the event belongs.
• Description -- User-defined event description.
• Type -- Describes the event type. Possible values are:
• Log -- Event type is a log entry.
• Trap -- Event type is a trap.
• Log and Trap -- Event type is both a log entry and a trap.
• None -- There is no event.
• Time -- Time when the event occurred for example 29 March 2004 at 11:00am is displayed as 29/03/2004
11:00:00.
• Owner -- The device or user that defined the event.
• Remove -- When selected, removes the event from the RMON Events Table.
RMON Events Log
The RMON Events Log page contains a list of RMON events.
To open RMON Event Log screen perform the folling:
1.
Click Statics/RMON -> RMON -> Events Log
Figure 3-82 RMON Events Control screen
94
Advertisement
Table of Contents
