Table of Contents
Advertisement
To open EAP Statistics screen perform the folling:
1.
Click Statics/RMON -> Table Views -> EAP Statistics
2.
The EAP Statistics screen is displayed as in Figure 3-78
The page includes the following fields:
• Port -- The port which is polled for statistics.
• Refresh Rate -- Amount of time that passes before the interface statistics are refreshed.
• Frames Receive -- The number of valid EAPOL frames received on the port.
• Frames Transmit -- The number of EAPOL frames transmitted via the port.
• Start Frames Receive -- The number of EAPOL Start frames received on the port.
• Log off Frames Receive -- The number of EAPOL Logoff frames that have been received on the port.
• Respond ID Frames Receive -- The number of EAP Resp/Id frames that have been received on the port.
• Respond Frames Receive -- The number of valid EAP Response frames received on the port.
• Request ID Frames Transmit -- The number of EAP Requested ID frames transmitted via the port.
• Request Frames Transmit -- The number of EAP Request frames transmitted via the port.
• Invalid Frames Receive -- The number of unrecognized EAPOL frames received on this port.
• Length Error Frames Receive -- The number of EAPOL frames with an invalid Packet Body Length received
on this port.
• Last Frame Version -- The protocol version number attached to the most recently received EAPOL frame.
• Last Frame Source -- The source MAC address attached to the most recently received EAPOL frame.
4.4.2 RMON
Remote Monitoring (RMON) allows network managers to view network information from a remote location.
The page includes the following fields:
The RMON page contains links to the following topics:
Figure 3-78 EAP Statistics screen
90
Advertisement
Table of Contents
