Logs - Planet Networking & Communication WGSW-24010 User Manual

The page includes the following fields:
• Interface -- Contains an interface list on which SNTP can be enabled.
• Receive Server Updates -- The amount of time that passes before the SNTP server is polled for information.
The field range is 3600 - 4294967295 seconds.
• Remove -- Disables SNTP on a specific interface, when selected.

4.2.3 Logs

The Logs page contains links to the following topics:
• Global Parameters
• RAM Log
• Log File
• Remote Log Server
Global Parameters
The Global Log Parameters page contains fields for enabling logs globally, and fields for defining log parameters. The
Severity log messages are listed from the highest severity to the lowest.
Event messages have a unique format, as per the SYSLOG RFC recommended message format for all error reporting. For
example, Syslog+ local device reporting. Messages are assigned a severity code, and include a message mnemonic,
which identifies the source application generating the message. Messages are filtered based on their urgency or
relevancy. The severity of each message determines the set of event logging devices to which are sent for each event
logging device. The following table contains the Log Severity Levels:
Severity Type
Emergency
Alert
Figure 3-22 SNTP Broadcast Interface Table screen
Severity Level
0
1
Description
The system is not functioning.
The system needs immediate
attention.
Example
Memory overflow.
Main system memory pool
overflow.
23