Table of Contents
Advertisement
The page includes the following fields:
• Log Index -- The log number in the Log File Table.
• Log Time -- Specifies the time at which the log was entered in the Log File Table.
• Severity -- Specifies the log severity.
• Description -- The log message text.
Remote Log Server
The Remote Log Server Settings page contains fields for viewing and configuring the available Log Servers. In addition,
new log servers can be defined, and the log severity sent to each sever.
To open Remote Log Server Settings screen perform the folling:
1.
Click System -> Logs -> Remote Log Server Settings
2.
The Remote Log Server Settings screen is displayed as in Figure 3-25.
The page includes the following fields:
• Available Servers -- Contains a list of servers to which logs can be sent.
• UDP Port (1-65535) -- The UDP port to which the logs are sent for the selected server. The possible range is 1
- 65535. The default value is 514.
• Facility -- Defines a user-defined application from which system logs are sent to the remote server. Only one
facility can be assigned to a single server. If a second facility level is assigned, the first facility level is
overridden. All applications defined for a device utilize the same facility on a server. The possible field values
are: Local 0 - Local 7.
• Description (0-64 Characters) -- The user-defined server description.
• Delete Server -- Deletes the currently selected server from the Available Servers list, when selected.
The Remote Log Server Settings page also contains a severity list. The severity definitions are the same as the severity
definitions in the Global Log Parameters page.
Figure 3-24 Log File Table screen
Figure 3-25 Remote Log Server Settings screen
26
Advertisement
Table of Contents
