Assert - Planet Networking & Communication WGSW-24010 User Manual

Asset
The Asset page contains parameters for configuring general device information, including the system name, location, and
contact, the system MAC Address, System Object ID, date, time, and System Up Time.
To open Access screen perform the folling:
1. Click System -> General -> Assert
2. The Access information screen is displayed as in Figure 3-15.
The page includes the following fields:
• System Name (0-160 Characters) -- Defines the user-defined device name.
• System Contact (0-160 Characters) -- Specifies the name of the contact person.
• System Location (0-160 Characters) -- The location where the system is currently running.
• MAC Address -- Specifies the device MAC address.
• Sys Object ID -- The vendor's authoritative identification of the network management subsystem contained in
the entity.
• Service Tag -- The service reference number used when servicing the device.
• Asset Tag (0-16 Characters) -- Specifies the user-defined device reference.
• Serial No. -- The device serial number.
• Date (DD/MM/YY) -- The current date. The format is month, day, year, for example, 11/10/02 is November 10,
2002.
• Time (HH:MM:SS) -- Specifies the time. The format is hour, minute, second, for example, 20:12:03 is eight
twelve and three seconds in the evening.
• System Up Time -- Specifies the amount of time since the last device reset. The system time is displayed in the
following format: Days, Hours, Minutes and Seconds. For example, 41 days, 2 hours, 22 minutes and 15
seconds.
After entering the information, "click Apply Changes" to update the device.
Figure 3-15 Asset information screen
14