Control Panel - Arjohuntleigh citadel Instructions For Use Manual

CONTROL PANEL

Citadel Patient Therapy System Control Panel
20
Power On / Off Button
turn Citadel Patient Therapy System on or off. LED will light
and an audible tone will sound. Bed must be plugged into AC
power for control unit to turn on.
Lock Out Button
activate or deactivate lockout of all control unit functions.
Pressing the CPR button overrides all lockouts.
Side Rail Down Indicator
side rails are down.
Fowler Angle Indicator
greater than 30°.
Alarm Indicator
condition exists in the Citadel Patient Therapy System. The
icon will turn off when all alarm conditions are no longer
present and the alarm has been acknowledged by pressing
the Alarm Silence / Clear Button.
Alarm Silence / Clear Button
alarm. Pressing this button will clear an alarm indicator for a
condition that has been resolved. If the alarm condition has
not been resolved, pressing the button will mute the alarm
for ten minutes. If the condition causing the alarm is not
corrected within ten minutes the alarm tone will resume.
Seat Deflate Button
deflate. Use seat deflate to reduce the air pressure in the
cushions of the body section in order to assist with patient
exit and bedpan placement. An audible tone will sound to
indicate when the pressure in the seat section has dropped
by 50%. Periodically an audible tone will sound to remind the
user that the function is still active.
- Press and hold for two seconds to
- Press and hold for two seconds to
- Lights up when the left or right
- Lights up when fowler angle is
- Lights up when an alarm or alarm
- Press to acknowledge an
- Press to activate or deactivate seat
Citadel Patient Therapy System
min
min
min