Elektron ANALOG KEYS Full Reference Manual page 94

AMPLITUDE
The AMP page contains settings for the amplitude envelope and the effects sends, as well as panning and
volume of the sound.
AMP
ATK (EnvA Attack) sets the attack time of the EnvA envelope,
which controls the amplitude of the track.
DEC (EnvA Decay) sets the decay time of the EnvA envelope.
SUS (EnvA Sustain) sets the sustain level of the EnvA envelope.
REL (EnvA Release) sets the release time of the EnvA enve-
lope.
SHP (EnvA Shape) sets the general shape of the EnvA enve-
lope. Several linear and exponential shapes are available. A dot
to the left of the visual representation of the envelope indicates
that the envelope will restart from level zero. In other cases it will
start from the level it had when being trigged.
CHO (Chorus Send) sets the amount of synth track signal to
send through to the Wideshift Chorus effect.
DEL (Delay Send) sets the amount of synth track signal to send
through to the Saturator Delay effect.
REV (Reverb Send) sets the amount of synth track signal to
send through to the Supervoid Reverb effect.
PAN (Pan) positions the Sound of the synth track in the stereo
field.
VOL (Volume) sets the volume of the Sound. This parameter is
independent of the LEV parameter.
A-4
Appendix A: SYNTH TRACK PARAMETERS