Elektron ANALOG KEYS Full Reference Manual page 104

CV (PITCH HZ/V)
TUN (Coarse Tune) sets the coarse tuning of the CV in semi-
tones.
FIN (Fine Tune) sets the fine tuning of the CV.
BND (Bend Depth) setls the bend depth. The higher the setting,
the more the pitch of a trigged note will be offset.
SLI (Note Slide time) sets the CV control of the slide time of note
slides.
SRC (Source Track) sets the track to use for sending CV signals.
The CV track, FX track and synth tracks 1-4 can be used as
source.
C-2
CV (VALUE LIN)
VAL (Value) sets the voltage level of the CV. Applicable when the
chosen CV type is VALUE LIN.
.
Appendix C: CV TRACK PARAMETERS