GLOBAL MENU
56
• INT.TRIG sets the chosen KEYBOARD or external MIDI keyboard key or range to
control specific Sounds from the Sound pool or from the +Drive Sound library.
RANGE LOW sets the note on the keyboard on which to start the desired key-
board range.
RANGE HIGH sets the note on the keyboard on which to end the desired key-
board range. If a single key is to be mapped, set to the same note as RANGE
LOW.
TRACK sets which track the selected keyboard range or key will play. AUTO
will play the active track, while TRK 1, TRK 2, TRK 3, TRK 4, FX TRK and CV
TRK sets the range to play the specific synth, FX or CV track of your choice.
NOTE sets which note the start of the chosen keyboard range will play. If no off-
set is desired, it should be set to the same note as RANGE LOW.
NOTE INC defines by what increment the subsequent notes played will
increase. For instance, if this value is set to 2, and the first note in the range is
C5, the following note in the range will play D5, the one after that E5 and so on.
If set to 0, all notes in the keyboard range will play the same note (as set in
NOTE above). If a 1:1 correspondence is desired, set to 1.
SOUND SLOT sets which one of the 128 Sounds, found in the Sound pool of
the active project, the keyboard range will play. If set to OFF, the track Sound of
the chosen TRACK above will be played.
SOUND INC sets by what increment the next key in the chosen keyboard range
will play the next sound slot Sound. If set to 0, the same Sound as defined
above will be played across the whole defined range. If set to 1, it will play the
next successive sound slot Sound for each successive key pressed. Setting the
value to 2 will play every other Sound starting from the sound slot, setting it to 4
every fourth and so on.
FIXED VEL will, if set to OFF, make the velocity sensitivity of the keyboard work
as usual. It may also be set to a constant specific value between 1 and 127, 1
being the lowest and 127 the highest possible velocity.
DELETE ENTRY deletes the whole entry. Select and confirm by pressing [YES/
SAVE].
INSERT BEFORE will create a new entry with a range ending on the note
preceding the current entry. Select by pressing [YES/SAVE].
INSERT AFTER will create a new entry with a range beginning on the note suc-
ceeding the current entry. Select by pressing [YES/SAVE].
• EXT.TRIG allows MIDI control of external equipment for a chosen KEYBOARD or
external MIDI keyboard key or range.
CHANNEL sets which specific MIDI channel on which the MIDI note messages
are to be sent, or AUTO.
NOTE sets which note the start of the chosen keyboard range will play.
NOTE INC defines by what increment the subsequent notes played will
increase.
Need help?
Do you have a question about the ANALOG KEYS and is the answer not in the manual?
Questions and answers