Console Assembly - SOLE SE578SA Service Manual

Model
Parts
Procedures：
1. Display: If there is no display, follow
the following procedures for diagnosis.
2. Make sure Power is plug in properly
and AC breaker is not activated, as
shown in figure 1.
3. Make sure that all connectors,
including cables for the console, and
AC power, are connected properly.
Disassemble the console to check
cables inside it if necessary.
4. If all connections are fine then check
to determine if cable breaks or console
or lower controller fails, as shown in
figure 2 and 3.
SE578SA

1 Console Assembly

Service Troubleshooting
Rev.
1
2
3