Bushing Housing - SOLE SE578SA Service Manual

Model
Parts
Procedures：
1. Follow procedures 2 and 3 to take
apart Connecting Arm and Pedal Arm.
2. Use 12 mm wrench to release 5/16" x
15m/m hex head bolt with 5/16" x 35 x
1.5T flat washer and the Bushing
Housing can be released, as shown in
figure 1.
3. To resume, be sure thatψ25 wave
washer is returned onto the shaft then
return the Bushing Housing onto the
shaft and tighten with 5/16" x15m/m
hex head bolt with 5/16" x 35 x 1.5T
flat washer, as shown in figures 2.
4. Follow procedures 3-4 and 2-5 to
return Pedal Arm and Connecting
Arm.
SE578SA

9 Bushing Housing

Service Replacing Parts
Rev.
1
2
3