Idler Wheel Assembly - SOLE SE578SA Service Manual

Model
Parts
Procedures：
1. Follow procedures 2, 3, 4, 5 and 6 to
take apart Connecting Arm, Pedal
Arm, both left and right Side Cases,
Cross Bar and the Belt.
2. Use 13 mm wrench to loosen M8 x 9T
nut on M8x170mm J-bolt together with
5/16" x 23 x 1.5T flat washer until
J-bolt is released. Use the same wrench
to release M8 x 20 carriage bolt, which
secures Idler Wheel Assembly,
together with 5/16" x 20 x 1.5T flat
washer and M8 x 7T nut to take Idler
Wheel Assembly apart, as shown in
figures 1 and 2.
3. To resume, tighten M8x20 carriage
bolt, 5/16" x 20 x 1.5T flat washer and
M8 x7T nut to secure Idler Wheel
Assembly (to be tighten after the belt
has been adjusted) and return the J-bolt
and other parts. Follow procedures 6,
5, 4, 3, 2 to return other parts.
SE578SA

7 Idler Wheel Assembly

Service Replacing Parts
Rev.
1
2