Slide Wheels - SOLE SE578SA Service Manual

Model
Parts
Procedures：
1. Use Phillips head screwdriver to
release M5x15mm Phillips head screw
to take off Slide Wheel Cover, as
shown in figure 1.
2. Use C-ring Pliers to releaseψ17
C-ring and the Sliding Wheels can be
released, as shown in figure 2 and 3.
3. To resume, apply some lubricant on
the wheel shaft and return oneψ17
wave washer, sliding wheels and
another ψ17 wave washer in
sequence and secure with C-ring then
return the wheel cover.
SE578SA
10 Sliding Wheels
Service Replacing Parts
Rev.
1
2
3