SOLE SE578SA Service Manual page 10

Model
Parts
Procedures：
5. To resume, connect the red jumpers
and the grounding back on the AC
Electronic Module.
6. Return Left Side Case (with one 5/16"
x 23 x 1.5T flat washer on it) onto the
main frame and use 4x15self tapping
screw with 1/4"x19 flat washer to hold
it (not too tight temporarily) then
tighten with
screws (make sure Side Case matches
with Round Disk). Tighten 4x15 self
tapping screws, as shown in figures 7
and 8.
7. Match both Side Cases with each other
and use 7pcs of 4x19 self tapping
screws and 3pcs of 5x16 tapping
screws to secure them.
8. Reverse above procedures to resume
Pedal Arm and Connecting Arm.
SE578SA
4 Left and right Side Cases
3pcs of 5x16 tapping
Service Replacing Parts
Rev.
5
6
7
8