Keithley S530 Administrative Manual page 17

Section 2: S530 site preparation and installation S530 Parametric Test System Administrative Guide
8. Remove the four bolts from the bottom of the crate that are attached to the bottom of the S530
system cabinet using a 19 mm socket head on a socket wrench.
Figure 11: System bolted to the crate
Figure 12: Removing the bolts from the crate
9. Save the hardware (the four bolts and washers) that you remove from the bottom of the crate.
Figure 13: System crate hardware
S530-924-01 Rev. D / September 2017
2-8