Pepperl+Fuchs VAG-PB-KF-R4 Manual page 67

Appendix: Putting Profibus into Operation with a Siemens S5
16.Select the Profibus slave. With the command "Configure | Slave parameters... |
Parameterize..." you get to the dialogbox "Parameterize".
Edit the dialogbox as shown above, to set the user memory fields and to state the
AS-i configuration in the parameterization telegram.
17.After closing this dialogbox save your project with the command "File | Save".
18.The last step is exporting the data to a memory card with the command "File | Ex-
port | Memory Card..."
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
AS-i/PROFIBUS Gateway
Copyright Pepperl+Fuchs, Printed in Germany
67