Pepperl+Fuchs VAG-PB-KF-R4 Manual page 58

As-interface/profibus gateway p20
Table of Contents

Advertisement

What to do ?
Change to the protected operating mode
and store the AS-i configuration.
The configuration of the master is now finished.
If the AS-i Master is a gateway, the hierarchically higher fieldbus system can be put
into operation now.
The gateway stays in the off-line phase (the display shows "40"), the LED
"config err" lights up), until the hierarchically higher fieldbus system oper-
ates properly.
Subject to reasonable modifications due to technical advances.
58
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Appendix: The First Commissioning of AS-i
How to go about it?
Leave the configuration mode by press-
ing the "mode" button for at least five
seconds until the "prj mode" LED goes
out.
AS-Interface
Copyright Pepperl+Fuchs, Printed in Germany

Advertisement

Table of Contents
loading

Table of Contents