Table of Contents
Advertisement
Front panel lockout (Executive mode)
The front panel lockout prevents the operation of the switcher from the front panel. If you
try to select an input when the front panel is locked, all of the input buttons flash once and
the input selection remains unchanged.
To toggle the front panel lock on or off, press and hold the input 7 and input 8 buttons
simultaneously for approximately 3 seconds, until all of the input buttons flash three times.
System reset
The switcher can be reset from the front panel to:
Unmute the switched output (which can be muted under serial port control only).
z
Unlock the front panel.
z
Select input 1 for output.
z
To reset the switcher, press and hold the input 1 button while you apply power to the
switcher. The input buttons blink red, green, red, amber, and go out. Input 1 is selected (the
input 1 button is lit).
Background illumination
The buttons on the front panel can be set to provide amber background illumination at
all times or the background illumination can be turned off. To toggle the background
illumination on or off, press and hold the input 1 and input 2 buttons simultaneously for
approximately 3 seconds.
Extron FOX SW8 • Installation and Operation
8
Advertisement
Table of Contents
