Table of Contents
Advertisement
5.
6.
7.
Using the Help System
For information about program features, you can access the help program in either of the
following ways:
z
z
Button-Label Generator Program
The Button Label Generator software creates labels that you can place in the translucent
covers of the input selection buttons. You can create labels with names, alphanumeric
characters, or even color bitmaps for easy and intuitive input and output selection.
Labels" documents the procedure for removing and replacing the translucent covers.
The Extron Button Label Generator is available on the Extron website, www.extron.com,
under the
the program.
Figure 16.
NOTE:
By default, the Windows installation creates a
ButtonLabelGenerator
or folder named "Extron Electronics."
Click
Browse
. The
Select files to Upload to Extron Server...
appears.
Navigate to the folder where you saved the firmware upgrade file. Select the file and
click
Open
. The
Firmware Loader
CAUTION: Valid firmware files must have the file extension .S19. Any other file
extension is not a firmware upgrade for your matrix switcher.
Click
Upload
. The
File Loader
minutes. Please wait...
the upload. When the upload is complete, the Firmware Loader reports
complete!
NOTE:
Firmware upgrades take about 30 seconds.
When the Firmware Loader reports,
the Firmware Loader and then again on the port configuration window. The Firmware
Loader and the Universal Switchers Control Program close.
From within the switcher control program, select
From within the switcher control program, press the <F1> key.
Download
tab. Click the
Location of Software on the Website
The Button Label Generator software is also included on the Extron Software
Products CD-ROM that accompanies the switcher.
directory and places the Button Label Generator icon into a group
returns to the top.
reports,
This process could take several
, then displays a status bar that shows the progress of
Transfer complete!
>
Help
link (see figure 16), and download and install
Software
C:\Program Files\Extron\
Extron FOX SW8 • Remote Control
window
Transfer
, click the
Exit
button on
on the task bar.
Contents
"Button
17
Advertisement
Table of Contents
