Table of Contents
Advertisement
Information/System Options
The Information/System Options menu provides information on the System 7SC
(firmware version and part number) and on the projector and driver. The switcher
can also be reset to factory default settings via this menu.
Extron
System 7SC
MENU
SWITCHER SETUP/
CONFIGURATION
MENU
AUDIO/VIDEO
ADJUSTMENTS
MENU
IR LEARNING
CONFIGURATION
MENU
INFORMATION
NEXT
SYSTEM/OPTIONS
Reset to Default (clearing settings and adjustments)
Resetting the System 7SC clears all the user-made settings and adjustments from
the System 7's memory and replaces them with the factory default settings. This
includes settings for audio level, color, tint, brightness, contrast, detail, and
centering. All inputs will be reset to RGB input.
When the system is reset, the IR and RS-232 commands and drivers will remain in
memory.
Global system reset
A global system reset clears and resets all of the System 7SC's settings, including
the settings/adjustments discussed above and all programming, IR and RS-232
commands, and drivers. To perform a global reset, press and hold the Menu and
Next keys while connecting the System 7 to an AC power source.
Image adjustments
All the image adjustments are stored in memory and can be set separately for each
input. Image adjustments apply to scaled video output only; RGB signals are
passed through without adjustments.
Color, tint, brightness, contrast, detail
To adjust an image for color, tint, brightness, contrast, or detail, follow the steps on
the next page. An illustration of making color adjustments shows the process,
which is the same for all the image adjustments.
Sys 7SC VerX.XX
No Driver
NEXT
PN 60-340-01
No Version
Projector and driver
information
Drivername or Custom
Version of the driver
SHARP
XGNV6XU
IR Rev CUSTOM
System 7SC • Operation and Configuration
Reset to Default
NEXT
NEXT
Press Menu&Next
MENU
4 sec.
NEXT
Confirm Reset
Press Menu&Next
MENU
NEXT
Please Wait
NEXT
Resetting System
3-17
Advertisement
Table of Contents
