Powering On - Fujitsu Storage ETERNUS AF650 S2 Basic Operation Manual

Chapter 2 Basic Operation
2.2 Powering On and Off
■
To Switch to OFF
Turn the PSU switch of the power supply unit to the OFF position (marked "¡").
This does not need to be turned off for normal operation.
Figure 2.6 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit
Power supply unit (PSU#0)
Check that the POWER LED of the power supply unit is off.
2.2.3

Powering On

This section explains how to turn on the ETERNUS AF.
To turn on the ETERNUS AF, perform the following procedure.
Via the power switch
•
Press the Power switch to turn on the ETERNUS AF.
The following methods can be used to turn the power on by linking with the server.
Power Synchronized Unit
•
Use the power synchronized unit to turn on the ETERNUS AF.
Wake On LAN
•
Use the Wake On LAN function to turn on the power.
Before turning on the ETERNUS AF, make sure that the main line switches of the power distribution units
and the PSU switches on the power supply units of the ETERNUS AF are "ON". Do not turn the main line
switches of the power distribution units and the PSU switches on the ETERNUS AF to the OFF position.
Power supply unit (PSU#1)
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
36
P3AG-1932-04ENZ0