Commodore C-NET 128 v7.0 User Manual page 89

recommended to be used by all network nodes.
be turned on.
without
is an 'active' node
it, or the node will be calling
should be turned on.
routines. The pauq
one file for transmission.
with must have the pauq routines
pauq routines do not have to be used for
work. The pauq routines are contained in Multi-Net
v1.9.
A-G
will
the day of the week
G=Saturday). It is recommended
to call out every day.
you could have a rather large block of files to download
if your system does not call out every day.
calls you, you do NOT have to set the call out times for it, as that
CD:
to
adjustable)? For a local
to call long distance), it might be
to go
day than it is allowed
set to zero (0), it will NOT call that
conversely, if it is set to 9, it will call every time it
compiles and has something to send.
IMPORTANT NOTE:
send,
FH:
up
messages to go out to
connection to see if it is allowed to
Each connection that you might have may or
active, at that hour, however, to make the network as
fast as possible, we still keep packing the messages
Multi-Net is allowed to compile them.
compiling messages, it finds that it is allowed to call, it will make
column holds
Multi-Net to call out.
last hour. The hour is during that day
if you want it to call from 11:00 P.M. until 6
the next morning, you will have to use 11 PM on the first
The second flag is to simply turn off that particular node
having to 'kill' the connection.
The third flag is to turn off or turn on the pauq
Each of the letter commands are to control WHEN Multi-Net
call that particular node.
When the network
is done from the other system.
Calls per day. How many times should Multi-Net be allowed
call this system on this day (each day is
beneficial to have it call whenever there are new messages
out.
Multi-Net WILL NOT call out if there is nothing to
send. Multi-Net must have net mail, or messages to
First Calling Hour Allowed:
messages to go out, it will first distribute all
three attempts to connect to that system.
There is
This flag should
(meaning that you will be calling
routines will pack all your N* files into
The nodes that you connect
that you are editing (A=Sunday,
Also, if another node
system (where you do not have
Multi-Net will not call more times per
to. If the Calls per day are
or it will not call out.
When Multi-Net begins to pack
where, and then look at each
If, when it completes
that hour of the day that will allow
If the node
you, then this flag
turned on as well.
Multi-Net to
The letter is equal to
that you set Multi-Net
gets busy,
system, and
call any of them.
may not be
whenever
The 'FC'
a catch to this and the
ONLY, meaning
The
A.M.