Commodore C-NET 128 v7.0 User Manual page 67

key). Outside of the editor system, this key may not be used.
editor system, only users with access groups configured to use MCI may hit
this key. Only high level access groups and system operators should be
given access to the MCI as it is easily over used and misused.
commands can be placed anywhere in the text.
place of the English pound sign in these explanations.
always used as #Xn where 'X' is a command letter and 'n' is a single digit
number.
#a1 Disable the use of the spacebar or the '/' key to abort the
current message.
#bn Print number of beeps to the user on-line.
#cn Change the text color display in color graphics mode.
You may
the C= key plus the
Programming mode requires the
appropriate MCI number in the list below:
0 Black
4 Purple
8 Orange
L Gray 2
On the 128, 8 is dark purple, and K is dark cyan.
all of these
NOTE: Place a double pound sign '##' in any text where you want the
pound sign to be displayed in the actual text.
#dn After a '#t' (test) MCI command, branch to the label number
indicated
if the test was not
#en After a '#t' (test) MCI command, branch to the label number
indicated it
#f0 Move the cursor to the home position (don't clear the screen
first).
#f1 Clear screen and Home the cursor.
#g1 Stop printing until a character is pressed.
considered as
case if necessary.
#hn Will print a specified number of backspaces.
NOTE:
more
again with the
backspaces, you enter
#in Stop printing until a full line in input and return pressed.
The line will go
case as necessary.
#jn Jump directly to label specified by a number or letter.
#k1 Turn multi-color on.
#k2 Turn multi-color off.
#l1 Turn the printer on.
#l2 Turn the printer off.
#mn A label mark.
the
the 'J', 'E', or 'D'
simply use the CONTROL key plus the color key, or
1 White
5 Green
9 Brown
M Lt. Green
colors show up in ANSI mode.
(see the '#mn' command for information about labels)
test succeeded.
(an$) for programming, and converted to upper
The maximum number that MCI will accept is 9 (nine).
than 9 spaces are required, you MUST issue the command
extra spaces added.
This command marks the spot in a message where
cursor must jump to after a '#tn' (test) and followed by
The '#' has been used in
color key while in CG Editor mode.
'#cn' command and the
2 Red
6 Blue
J Pink
N Lt. Blue
equal.
Example: you want 14
'#h9#h5'.
into (an$) and will be converted to upper
command. If the 'J' command is used by
Within the
These
These commands are
(NOTE)
3 Cyan
7 Yellow
K Gray 1
O Gray 3
(NOTE): Not
The input will be
If