New User Application - Commodore C-NET 128 v7.0 User Manual

If this is a brand new BBS, after booting the system for the first time
there will be no user data.
Operator. So, the first thing you need to do is create an account for
yourself with all the rights and privileges that will allow you complete
and utter control of your system.
Following is a walkthrough to get you started.
5.4.1 LOGGIN ON FOR THE FIRST TIME
From the "Waiting for call" screen access the light bar controls (the four
arrow keys in the upper right hand corner of your keyboard).
"right arrow" key until the light bar has highlighted the letters "LO".
Now press the "up arrow" key to toggle the "LO" option on.
a check mark appear to the left of the letters "LO" and simultaneously the
screen will clear and the system will be prompting you to hit the INST/DEL
key. Hit the INST/DEL key now.
When the "LOGON:" prompt appears type:
NEW
And hit RETURN.
section 5.4.2 for more information).
and follow the prompts.
Application" and have practiced logging in by typing your new ID and
PASSWORD you should after following the "Logon Flow" (see section 5.4.3 for
more information) arrive at the MAIN prompt.
Now you need to give yourself System Operator access.
arrow controls one more time.
letter "AC" is highlighted.
option on. A check mark should appear to the left of the letters "AC".
Now on the left-hand side of the Status Screen (where your information is
now displayed), in the middle you will see the letters "AC" again.
Accessing the light bar arrow keys, press the "right arrow" key until the
value next to the letters "AC" is the letter "e".
should be at level 14, the highest access level possible in C-NET.
letter "e" in hexadecimal equals 14.
toggle the "AC" option off on the light bar (the check mark should be
removed from the left of the letters).
letter "O" for OFF and hit RETURN.
to logoff the system.
to leave Feedback, press "N" for No.
your new access information.
You are now a System Operator.

5.4.2 NEW USER APPLICATION

Entering NEW (which you will have to do initially to become a user of your
own system) will begin the new user application process.
will display 'new user login in progress' to the left of the time remaining
(TIME=) display until the new user login process has been completed, or, if
it is aborted, another user logs on.
on your system disk) will be displayed at this time.
Not even an account for you the System
You will now be placed in the "New User Application" (see
After you have completed the "New User
Press the "left arrow" key once so the
Then press the "up arrow" key to toggle the
Press "Y" for Yes.
Good Luck!
Fill out the requested information
System Operator access
Now press the "up arrow" key again to
Now at the MAIN prompt type the
You will be prompted if you would like
You will be prompted if you like
The system will log you off and save
The file 'sys.new user' (if present
Press the
You will notice
Access the light bar
The
The status window
The new user login