Commodore C-NET 128 v7.0 User Manual page 82

Screen Blanking on/off
Default color change
Modem String at Logon You may send a particular string to the modem
Modem String at Logoff
System 'Line'
System Name
Password mask
System password
18.4 AUTO-BACKUP UTILITY CONFIGURATION
For your convenience, a file is included with your C-NET v6.* to allow you
to back up essential files automatically during Automaintenance.
command in prg.utilities is available to configure the system so that
automaintenance will know what files to copy from what drive to what drive.
*NOTE: The backup should not be made to the same drive number as the one
that C- NET is running on.
backup should be
Several filename structures are allowed using the autocopy feature of C-
NET. You may select a specific filename, such as sys.udata, or you may
specify a group of files by entering just enough characters to flag the
autocopy routine to 'tag' all files matching that pattern.
you may wish to have EVERY system file copied to another drive.
this, you might enter a file pattern such as sys.*, which would copy over
every file beginning with sys. but would not include such files as menu e1.
You will be first prompted to tell the configuration utility what drive to
copy from. Enter the device and LU/drive to copy from.
prompted for a target device/drive.
source drive. Finally, you will be prompted for a file pattern to match.
*NOTE: It is not recommended that you copy from one LU on your hard drive
You can tell C-NET whether to turn on
screen blanking at all times (upon bootup) with
this option.
You may select a new color without having to
take the BBS down to change it in the setup
utility.
when you logon locally (in addition to the in-
place off-hook command).
You may send another string to the modem
at local logoff time, in addition to the re-
initialization string sent regardless of whether
or not the last caller was local or remote.
The system 'line' is the line that is displayed at
the beginning of the E-mail scan routine and again
at the end of the list.
signs (=) followed by a carriage return.
change it to anything you'd like to have.
maximum of five characters may be used.
You may edit the system name as you would like it to
appear to your users.
v6.0'. Note to programmers: The system name is
kept in the variable sn$.
You can change the mask for the password character
(defaults to '*') to another character if you
wish. NOTE: Some of the characters, namely the
upper case graphics, will not necessarily be
displayed. You may get the upper case character
(the shifted letter) of some graphics.
You may also change the system REMOTE maintenance
password in the preferences editor.
If C-NET is running on drive 8, then the
made to drive 9.
This is entered the same way as the
It is NORMALLY 38 equal
It defaults to 'C-Net 128
For example,
Then you will be
You may
A
This
To do